Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 158)

4-60 W A N s u i t e 6 x 3 0
Figure 4.58 DHCP Details Screen
E n a b le Enables or disables the DHCP Server. Default is “Enable.”
N u m b er of P o rts Defines the number of DHCP ports to be used. In this version, only “1” is a
valid value.
T T L Time to Live for any DHCP packet. Default is 64.
S ervice Typ e Type of Service used by the DHCP Server packet. Default is 1.
L ease T im e Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
P rim ary D N S IP A d d r If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
S eco n d a ry D N S IP
A d d r
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
D o m a in N a m e Domain name to be used by all DHCP clients. Default is user’s server.
R ou ter IP A d d r IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
The DHCP Details screen provides the following user-activated prompts:
Prompt Function
Host Table Lists Host names (DHCP server identification).
Static Entry Table Creates a list of static IP addresses associated with MAC
addresses.
Address List Table Defines the addresses available for DHCP clients.
Address Status Table Displays DHCP Server statistics.
DHCP Port Table Defines DHCP Server ports.