Service details screen, Service details screen -26 – Verilink WANsuite 6x30 (34-00315.B) Product Manual User Manual
Page 124
4-26
W A N s u i t e 6 x 3 0
Figure 4.21
Service Table Screen
The Service Table screen displays the available services listed by Index
number.
Service Details Screen
Selecting a number from the <Index> column will display a Service Details
screen such as the one shown below (Figure 4.22). (In this example, the
selected service type is ATM.)
Figure 4.22
Service Details Screen
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you press the “Esc” key and return to the
previous screen.
In terfa ce
Selecting one of the interfaces will bring up a screen where you can view
interface parameters. These screens are the same ones displayed when you
select a sub-menu from the Interfaces screen described earlier on page 4-6.