Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 60)

3-32 W A N s u i t e 6 x 3 0
Figure 3.28 ATM Statistics (All Intervals) Screen
ATM Virtual Channels Screen
Clicking the “Virtual Channels” button on the ATM Service Details screen
will display a table (Figure 3.29) of all Virtual Channels on a specific ATM
service along with their state and alarm conditions.
Figure 3.29 ATM Virtual Channels Screen
The ATM Virtual Channels screen displays status information on the
following parameters listed below. The QoS Profile and Admin Status are
configured or changed on the Virtual Channel Details screen (Figure 3.30).
V P I Virtual Path Identifier number.
V C I Virtual Channel Identifier number.
A d m in S ta tu s Current Admin Status.
Values: Up, Down, Testing