Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 38)

3-10 W A N s u i t e 6 x 3 0
Figure 3.7 Network Performance 30 Day Screen
Some of the parameters across the top of the WANsuite 6230 Network screen
(Figure 3.8) differ from those on the 6130 Network screen. The parameters at
the top of the 6230 Network screen are described below.
Figure 3.8 WANsuite 6230 Network Screen
F ra m in g Selects the framing for the Network side of the DSU/CSU.
Values CCS, CAS, Unframed
Default: CCS
C o d in g Sets the Network side line coding.
Values: HDB3, AMI
Default: HDB3
T im in g Sets the timing source to synchronize the unit’s internal timing generators. In
all cases, slips are controlled to occur on frame boundaries at the Network
port when timing synchronization is lost.