Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 127)

V T 1 0 0 I n t e r f a c e 4-29
The ATM Statistics table is divided into two sections: Transmit (first three
columns), and Receive (next three columns). Each section provides real-time
updates (TimeStamp column) on the following statistics:
• Frames
−
current number of good frames transmitted/received
• Bytes
−
current number of bytes transmitted/received
• Errored Frames
−
current number of frames transmitted/received in error
ATM Virtual Channel Table Screen
Select the “Virtual Channels” prompt on the ATM Service Details screen to
display a table (Figure 4.25) of all Virtual Channels on a specific ATM
service along with their state and alarm conditions.
Figure 4.25 ATM Virtual Channels Table Screen
The ATM Virtual Channel Table displays status information on the
parameters listed below. These parameters are configured on the Virtual
Channel Details screen (Figure 4.26):
V P I Virtual Path Identifier number.
V C I Virtual Channel Identifier number.
A d m in S ta tu s Current Admin Status.
Values: Up, Down, Testing
O p er S ta tu s Current Operation Status.
Values: Up, Down, Testing
L a st C h a n ge Time and date of the Last Change.
Q O S P ro f Current QOS profile in use. The default profile is 0 (zero), which is used for
UBR traffic.