Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 18)

1-2 W A N s u i t e 6 x 3 0
telecommunications fabric to dynamically change routes “on the fly” to make
use of the most efficient and cost-effective transit across your network.
Because IP Gateway enables WANsuite to route IP traffic either statically or
dynamically across your LAN/WAN architecture, your need for costly routers
is substantially reduced. WANsuite is a one-stop solution that can help you
meet the requirements of your many different applications.
DHCP uses a server-client architecture to assign IP addresses to PCs and
workstations on the LAN. The DHCP server dynamically assigns these IP
addresses, which can be either temporary or permanent, to each PC or
workstation (DHCP client). These IP addresses are "housed" on the DHCP
server. The flexibility to reassign IP addresses saves the end user money by
eliminating the need for a single IP address for each piece of equipment on
the LAN.
NAT enables an enterprise to set up two sets of IP addresses
−
one set for
internal network use (or LAN traffic) and one set for external use (or Internet
traffic). This can provide a layer of security for a company by eliminating
outside access to internal IP addresses from the Internet.
The WANsuite 6x30 product family gives service providers and enterprise
customers the capability to monitor end-to-end network performance (with
support of up to 16 virtual channels); isolate performance problems to the
LAN, local loop, or ATM network; determine appropriate bandwidth needs;
and monitor network trends to aid in future capacity planning.
All of the WANsuite’s installation, performance configuration, traffic
monitoring, alarm reporting, and diagnostic capabilities can be configured
through the unit’s embedded Web server interface (WANsight™) using
Microsoft
®
Internet Explorer™. The Web server interface can be accessed
locally through the Ethernet port or the Supervisory port, or remotely through
a Network port. Especially advantageous is WANsuite’s advanced
monitoring and control capability that gives network administrators the
ability to plan future capacity requirements.
The unit’s built-in Service Aware technology lets network managers
maximize available WAN bandwidth and verify SLAs. This management
platform lets the end user see network activity (performance) and problems
(diagnostics) on any permanent virtual circuit (PVC), access line, or physical
circuit.
Features of the WANsuite 6x30 Product Fam ily
Perform ance
Historically, WAN access devices have tended to perform well as single-
function devices such as CSU/DSUs, but have not been optimized to address
higher level traffic issues such as service levels and integration. Verilink's
architecture and Web-based user interface work together to address all access