Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 166)

A-4 W A N s u i t e 6 x 3 0
WANsuite 6230 Specifications
Network Interface
Line Rate: 2.048 Mbps (
±
50 bps) unframed
Line Framing: CAS, CCS, or 2 Mbits unframed
Line Code: AMI or HDB3
Input Signal: E1, +1 to
−
27 dB
Connection: BNC jack at 75
Ω
(
±1
0 %), RJ-48 jack at 120
Ω
(
±1
0 %)
Output Signal: 3.0 V (
±
10 %) base- peak into 75 or 120
Ω
with protection
Jitter Control: per G.823 Sections 2.1 and 3.0
Timing Source: Internal, Network, Serial
Ones Density: HDB3, alternate fill; complies with G.701 and G.703
Serial Interface
Connection: DB-25 female
DTE Ports: Selectable EIA-530, RS-232, V.35, or X.21
Data Rate: Synchronous, nx64 kbps (where n = 1–32) or nx56 kbps
(where n = 1
−
31); or Asynchronous, 1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200 bps
Clocking: Internal, External
IP Gateway
10/100 Ethernet (IP Gateway or M anagem ent)
Protocols: RIP1, RIP2, OSPF
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Managem ent Interfaces
10/100 Ethernet (IP Gateway or M anagem ent)
Protocols: RIP1, RIP2, OSPF
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Supervisory Port
Connection: DB-9 female
Data Rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(default: 19200 bps)
Diagnostics
Performance: 15-minute, 24-hour, and 30-day monitoring (sampled every
second)
Network Loop: E1 network loopback