Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 71)

W e b S e r v e r I n t e r f a c e 3-43
Figure 3.41 IP Gateway Screen
RIP Parameters
R IP E n a b le Globally enables RIP 1, RIP 2, or No RIP.
Values: Disable, Enable RIP1, Enable RIP2
Default: Enable (RIP2)
R IP Tru st N eigh b ors Globally enables the trusted neighbors feature. If there is a list of trusted
neighbors in an IP Gateway, only RIP packets coming from those trusted
neighbors will be used to build the internal routing table.
Values: Enable, Disable
Default: Enable
R IP In terva l Interval for RIP packet to be sent. Default is 30 seconds.
R IP D o m ain Value representing the RIP domain. Default is 0.
OSPF Parameters
O S P F E n a b le OSPF stands for Open Shortest Path First Routing, which is a shortest-path-
first (SPF) or link-state protocol. OSPF is an interior gateway protocol that
distributes routing information between routers in a single autonomous
system. This Protocol is suitable for complex networks with a large number of
routers. If a large network is involved, OSPF may be the solution for the user.
Values: Disable, Enable
Default: Disable
O S P F R ou ter ID This 32-bit number assigned to each router running the OSPF protocol
uniquely identifies the router within an autonomous system. Each router
requires a unique router ID. Default is the LAN IP address of the unit.