Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 20)

1-4 W A N s u i t e 6 x 3 0
• Controls recurring ATM access costs
−
WANsuite products quickly pay for
themselves by allowing enterprises and service providers to optimize the use
of valuable bandwidth.
• Introduces new value-added offerings
−
these WANsuite units are stepping
stones to a new series of access services.
•
Lowers facility costs
−
easy installation and configuration cut down on
maintenance and sparing costs.
• Lets you use an existing router running PPP over an ATM network without
changing the external router’s configuration.
Features Sum m ary
• A powerful core architecture
• 10/100Base-T Ethernet port and asynchronous Supervisory port
• PowerPC™ platform with 16 Mbytes of RAM
•
IP Gateway
• 10/100Base-T Ethernet port
• Static routes
• Static ARP
• Dynamic routing protocols, including RIP 1, RIP 2, and OSPF
• Address Management: NAT and DHCP
• Programmable alarm thresholds
• Configurable PPP Serial port
• Supports V.35, EIA-530, and RS-232.
• The WANsuite 6230 additionally supports X.21.
• WANsight
−
An innovative Web-based user interface
• Embedded HTTP server for remote configuration and real-time reporting
via Web browser
• Decreased installation and configuration time for service employees
• Simplified troubleshooting and fault isolation of network problems
• Optimal management of ATM-based services
Front Panel
The front panel of the WANsuite 6x30 is shown below in Figure 1.1.
Figure 1.1 Front Panel of WANsuite 6x30