Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 13)

P r e f a c e xiii
C HAPTER 0
P
REFACE
About this Manual
This reference guide for the WANsuite 6x30 product family of ATM
integrated access devices (IADs) describes unit features and specifications,
configuration, and cabling. It is not a users guide containing step-by-step
procedures. Rather, this manual is designed to be used as a reference
regarding commands, interface ports, configuration parameters, and other
specific information about the WANsuite 6x30 units.
When this manual refers to the unit, you should assume the information
applies to all WANsuite 6x30 units.
Manual Organization
The chapters and appendices in this manual are arranged for quick reference
when you need it. You do not have to read previous chapters to understand
the subsequent chapters. Appendices are designed to complement the main
chapters.
• Chapter 1, About the WANsuite 6x30 – This chapter describes product
features and capabilities.
• Chapter 2, Installation – This chapter describes unit port connections and
powering information.
• Chapter 3, Web Server Interface – This chapter describes the menu screens
and configuration parameters accessed through the Web server interface.
• Chapter 4, VT100 Interface
−
This chapter describes the menu screens and
configuration parameters accessed through the VT100 interface.
• Appendix A, Specifications
−
This appendix defines the specifications for
each of the WANsuite 6x30 units. In addition, this section provides ordering
information and all the connector pin assignments for the interfaces on the
rear panel of the WANsuite 6x30 units.
• Appendix B, SNMP Agent
−
This appendix defines which Management
Information Base (MIB) files are supported by the WANsuite 6x30 SNMP
agent. In addition, instructions are provided for loading these MIB files into
most SNMP management stations.