Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 55)

W e b S e r v e r I n t e r f a c e 3-27
Services Screen
The Services screen (Figure 3.23) provides a view of the unit’s defined
services and displays the Interface and Type parameters for each service.
Figure 3.23 Services Screen
The table in the center of the screen displays the available services listed by
index number.
Service Details Screen
Clicking on an index number under the Service Index column will display a
Service Details screen such as the one shown below (Figure 3.24). (In this
example, the selected service type is ATM.)
Figure 3.24 Service Details Screen
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you click on “Submit” and return to the
previous screen.
In terfa ce Selecting one of the interfaces will bring up a screen where you can view
interface parameters. These screens are the same ones displayed when you
select a sub-menu from the Interfaces screen described earlier on page 3-5.