Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 123)

V T 1 0 0 I n t e r f a c e 4-25
NOTICE: To use newly established IP parameters, you must “Save and Restart.”
(See "Save and Restart" on page 4-5.)
Supervisory Configuration Screen
The Supervisory Configuration screen (Figure 4.20) displays the current speed
of the Supervisory port interface.
Figure 4.20 Supervisory Config Screen
The Supervisory screen lets you view and change the Supervisory port speed.
The Supervisory port only supports asynchronous character formats.
S p eed Used to change the Supervisory port speed (in bits per second).
Values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Default: 19200
Service Table Screen
The Service Table screen (Figure 4.21) provides a view of the unit’s defined
services and displays the Interface, Type, and Pair parameters for each
service.