Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 49)

W e b S e r v e r I n t e r f a c e 3-21
A tten u atio n Current loop attenuation for this endpoint as reported in a Network or
Customer Side Performance Status message.
E S Count of Errored Seconds on this endpoint since the unit was last restarted.
S E S Count of Severely Errored Seconds on this endpoint since the unit was last
restarted.
C R C Count of Cyclic Redundancy Check anomalies on this endpoint since the unit
was last restarted.
L O S W S Count of Loss of Sync Word Seconds on this endpoint since the xU was last
restarted.
U A S Count of Unavailable Seconds on this endpoint since the xU was last
restarted.
T im e E la p sed Total elapsed seconds in the current 15-minute interval.
15-Minute and 1-Day Intervals
Also included on this screen are buttons used to display the span endpoint
performance summaries for 15-minute intervals and for 1-day intervals. These
screens display only a summary of the errors (ES, SES, CRC, LOSWS, UAS)
that have occurred on the span during the interval selected.
The 15-Minute Intervals table provides one row for each endpoint
performance data collection 15-minute interval. The 1-Day Intervals screen
provides one row for each endpoint performance data collection 24-hour
interval.
Span Endpoint Maintenance Screen
Clicking on the “Span Endpoint Maintenance” button from the Span Endpoint
Details screen will display the screen shown in Figure 3.18. This table supports
maintenance operations (e.g., loopbacks) to be performed on segment
endpoints.
Figure 3.18 Span Endpoint Maintenance Screen
The Span Endpoint Maintenance parameters are described below.