TA Triumph-Adler FAX 950 - Manual (Page 109)

9-3
6HFWLRQ
Other Settings and Registration
TTI Transmission ON/OFF
Select here whether or not the TTI (Transmit Terminal Identifier) –
information which indicates the time of the transmission, number of
pages, name and fax number of the transmitting party, etc. – will be
automatically sent to the receiving party’s fax and printed out on the
received documents.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select whether you want to turn
TTI transmission ON or OFF.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
 
 
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
77,
77,
21
77,
2))
Reception Date and Time Print Out
ON/OFF
Select here whether or not the time and date of the reception will be
printed out onto the top edge of incoming documents. This
information is convenient for confirming the actual time of reception,
especially when documents are received from a location that is in a
different time zone than you are.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select whether you want to turn
Reception date and time print out ON or OFF.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
 
 
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
35,17 5; '$7(7,0(
35,17 5; '$7(7,0(
21
35,17 5; '$7(7,0(
2))