TA Triumph-Adler FAX 950 - Manual (Page 16)

2-4
6HFWLRQ
Fax Operation (Basic)
1 STOP key…Press to stop operations in progress, revert to the
initial mode, or eject documents from the ADF (Automatic
Document Feeder).
2 COPY/SPACE key…Press in order to make copies or to change a
character into a space during input of the other party’s name or fax
number.
3 START key…Press to start fax transmission, manual fax reception
or other operations.
4 CLEAR/ON-HOOK key…Press to erase a registered fax number
or other data when registering and cancelling data under a given
function or to dial without the need to pick up the telephone
receiver.
5 ON-HOOK indicator…Lit when the CLEAR/ON-HOOK key has
been pressed while the telephone receiver is still “on the hook”.
6 PAUSE/REDIAL key…Press to redial the last number dialled.
Press also while registering a fax number under an abbreviated
number or one-touch key in order to insert a pause of a few
seconds at that point in dialling.
7 ABBR./DIRECTORY key…Press to dial with abbreviated numbers
or to search the directory for names that are registered under
abbreviated numbers.
8 Message display…Displays the present date, time, operation
procedures and trouble, etc.
9 Resolution select key…Press to select the degree of resolution
most suitable to the documents being transmitted or the originals
being copied.
0 Resolution indicators…The uppermost indicator (PHOTO
MODE) is for the photograph mode, the middle indicator (SUPER
FINE) is for the Super Fine mode, and the lowermost indicator
(FINE) is for the Fine mode. Press the resolution select key to light
the resolution indicator corresponding to the desired mode. When
all of the indicators are out, the fax is in the Normal mode. (Refer
to page 2-13.)
! Reception mode select key…Press to select the desired
reception mode.
@ Reception mode indicators…The uppermost indicator
(MESSAGE TEL.) is for the TAD (message telephone) reception
mode. The bottom indicator (MANUAL RX.) is for the Manual fax
reception mode. When using a separately purchased telephone
with message telephone capabilities in conjunction with the fax,
press the reception mode select key until the MESSAGE TEL.
indicator lights. The Auto fax reception mode is the default setting
in this fax and, in this case, both indicators are out. When using
the Manual fax reception mode with a separately purchased
telephone connected to the facsimile, make sure the MANUAL RX.
indicator is lit.
# FUNCTION key…Press to select one of the facsimile’s functions
or registration procedures.
$ ENTER FUNCTION key…Press during registration and setting
procedures to register the currently entered data under a given
function.
% ON LINE indicator…Lit when the facsimile is to be used as a
printer or scanner.
^ ERROR indicator…Lit when a communications error or
mechanical problem has occurred.
& MEMORY indicator…Lit when there are documents stored in
memory.
A4 A4
8 1 2 8 1 2
C
1
#
3
5 6 4
8 9 7
0 *
2
A A
26 27 28 29 30
21 22 23 24 25
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
ABC DEF GHI JKL MNO
PQR ST UVW XYZ
* # 0~9 @ / . : ( ) &
? [ ] % ! =
A a
%
@ ! ‡ ° 2 3 1 ) › 5 4 6 7
^ & 9 0 8 * $ fi ⁄ ¤ ‹ fl # (
(2) Operation Panel
With the cover plate flipped down