TA Triumph-Adler FAX 950 - Manual (Page 113)

9-7
6HFWLRQ
Other Settings and Registration
Bulletin Board Function ON/OFF
If the Bulletin Board function is turned ON during Memory or
Confidential polling transmission, the documents will be available and
transmitted to an unlimited number of receiving parties upon receipt
of their polling request.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씰 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select whether you want to turn the
Bulletin Board function ON or OFF.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
)81&7,21
6(77,1*
6(77,1*
%8//(7,1%2$5'
 
 
6(7 '2&80(17
%8//(7,1%2$5'
21
%8//(7,1%2$5'
2))
Super Fine Function ON/OFF
If the Super Fine function is turned ON, and the transmitting party
transmits documents in the SUPER FINE setting, reception with the
SUPER FINE setting is possible. It is also necessary to turn the
Super Fine function ON in order to copy with the SUPER FINE
setting.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씱 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select whether you want to turn the
Super Fine function ON or OFF.
* If you change the present setting, the data for all documents
stored in memory will be deleted. Make sure there is no data left
in memory BEFORE changing this setting.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
 
 
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
6),1(5;&23<
6),1(5;&23<
21
6),1(5;&23<
2))