TA Triumph-Adler FAX 950 - Manual (Page 25)

C
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
PQR ST UVW XYZ
* # 0~9 @ / . : ( ) &
? [ ] % ! =
A a
2-13
6HFWLRQ
Fax Operation (Basic)
3
3. Selecting the transmission mode
Use the MEMORY TX. key to select the desired transmission
mode.
* There are 2 transmission modes available in this fax: Memory
transmission and Direct Feed transmission. When the
MEMORY TX. indicator is OUT, the unit is in the Direct Feed
transmission mode.
4
4. Selecting the resolution
Press the resolution select key to select the resolution most
suitable to the documents to be transmitted.
* Ordinarily, all of the resolution indicators are out; and the
Normal mode is thus selected. If the Normal mode is to be
used, there is no need to make any changes to this setting.
To use any of the other settings (FINE, SUPER FINE and
PHOTO MODE), press the resolution select key to light the
resolution indicator corresponding to the desired setting.
5
5. Selecting the contrast
Press the contrast select key to select the appropriate
document contrast.
* Ordinarily, both of the contrast indicators are out; and the
Normal mode is thus selected. If the Normal mode is to be
used, there is no need to make any changes to this setting.
To select “LIGHTER” or “DARKER”, press the contrast select
key to light the contrast indicator corresponding to the desired
setting.
<Transmission modes>
It is possible to select between the following 2 transmission modes.
• Direct Feed transmission mode: The other party’s fax number is
dialled first, and, once the connection has been established,
scanning of the documents to be transmitted begins.
• Memory transmission mode: Documents are scanned and entered
into memory first. Then, the other party is dialled automatically and,
once the connection is established, fax transmission will begin. In
this case, documents are returned to you – ready to use – the fastest
way possible.
<Resolution>
It is possible to select a resolution – from among the following 4
settings – most appropriate to the documents being transmitted.
• Normal: For transmitting documents with standard size characters
• FINE: For transmitting documents with relatively small characters or
thin lines
• SUPER FINE: For transmitting documents with detailed lines and
characters, etc.
• PHOTO MODE: For transmitting the clearest reproduction of
documents containing both photographs, etc., as well as text
<Notes>
• In the FINE and SUPER FINE settings, reproduced images appear
clearer in comparison to transmission in the Normal setting, but
transmission time is longer.
• In the PHOTO MODE setting, greys can be reproduced clearly, but
transmission time is longer than in the Normal or FINE settings.
<Contrast>
It is possible to select a document contrast – from among the
following 3 settings – when transmitting relatively dark or light
documents.
• Normal: For transmitting documents at a normal contrast
• LIGHTER: For transmitting dark documents at a reduced contrast
• DARKER: For transmitting light documents at a greater contrast
1
5 4
8 7
0 *
2
1
5 4
8 7
0 *
2