TA Triumph-Adler FAX 950 - Manual (Page 116)

Auto Shut-Off Time
When there is no operation of or activity with this fax for a designated
period of time, the Auto shut-off function will engage for energy
saving purposes. The amount of time the fax will wait before
engaging the Auto shut-off function can be adjusted here to between
5 and 120 minutes.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씱 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Use the cursor keys ( 씱 ) ( 씰 ) to select the amount of time this fax
will wait before engaging the Auto shut-off function (between 5 and
120 minutes).
* The amount of time can be set in 5 minute increments.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
Changing the Automatic Reception
Mode
This facsimile has 2 automatic reception modes: Auto Fax Reception
(page 2-17) and Auto FAX/TEL Switching (page 4-5). To change the
presently selected mode, carry out the following procedure.
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter the
registered management password and then press the ENTER
FUNCTION key. Refer to “(5) Entering Your Access Code”, page 7-28.
1. Press the FUNCTION key.
2. Press the ( 씱 ) cursor key until the following message appears in
the message display.
3. Press the ENTER FUNCTION key.
4. Press the ( 씱 ) cursor key until the following message appears in
the message display.
5. Press the ENTER FUNCTION key.
6. Press the cursor keys ( 씱 ) ( 씰 ) until the desired automatic
reception mode appears in the message display.
7. Press the ENTER FUNCTION key.
8. Press the STOP key. The message display will revert to the initial
mode.
9-10
6HFWLRQ
Other Settings and Registration
 
 
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
$872 6+872)) 7,0(5
$872 6+872)) PLQ

 
 
6(7 '2&80(17
)81&7,21
6(77,1*
6(77,1*
$8720$7,& 5(&(37,21
> Auto FAX/TEL switching
> Auto fax reception
$8720$7,& 5(&(37,21
7(/)$; 6:,7&+
$8720$7,& 5(&(37,21
)$; 5(&(37,21
$8720$7,& 5(&(37,21
$872)$; 5(&(37,21