6hfwlrq fax operation (basic), With the cover plate flipped up – TA Triumph-Adler FAX 950 User Manual
Page 17
2-5
6HFWLRQ
Fax Operation (Basic)
*
Keypad…Use to enter fax numbers.
* Even if your telephone service is for pulse dialling, press the
"
" key after connecting to the other party and any key pressed
on the keypad after that will transmit the related tone signal.
(
One-touch keys (No. 1 - 45)…Press to dial the fax number
registered under the corresponding one-touch key, as well as to
enter one of the characters marked under that key. Each of these
keys can be designated to function as either a one-touch key, a
program key, a group dial key or a chain dial key. Flip the cover
plate down to access one-touch keys No. 1 - 20, and flip it up to
access one-touch keys No. 21 - 45. When entering characters, flip
the cover plate down and press the one-touch key (No. 1 - 15)
marked with the desired character. One-touch key No. 19 serves
as the CAPS LOCK key. (Refer to “
)
MEMORY TX. indicator…Lit in the Memory transmission mode.
When this indicator is out, the fax is in the Direct Feed
transmission mode.
⁄
ALTERNATE DISPLAY key…When carrying out 2 operations
simultaneously (Dual access function) the display can be switched
for the duration this key is held down to allow monitoring of the
background operation currently in progress. If the STOP key is
pressed while this key is held down it is possible to cancel that
background operation.
¤
PRINT REPORTS key…Press to print out a desired report or list.
‹
DELAYED TX. key…Press to perform procedures for
communications which use the timer.
›
MEMORY TX. key…Press to select between the Memory
transmission and Direct Feed transmission modes.
fi
Cursor keys (
씱
) (
씰
)…Press to scroll through the message
display and select the desired function and/or setting. When
entering characters, the (
씰
) cursor key is also used to register the
selected character.
fl
DUPLEX key…Press this key when transmitting 2-sided
documents or making Duplex (2-sided) copies.
‡
Contrast select key…Press to select the level of contrast most
suitable to the documents being transmitted or the originals being
copied.
°
Contrast indicators…Press the contrast select key to light the
contrast indicator corresponding to the desired mode. When both
of the indicators are out, the fax is in the Normal mode. Make sure
the “DARKER” indicator is lit in order to increase the contrast of
lighter documents and the “LIGHTER” indicator in order to reduce
the contrast of darker documents.
A4
A4
8
1
2
8
1
2
C
1
#
3
5
6
4
8
9
7
0
*
2
A A
26
27
28
29
30
21
22
23
24
25
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
(
With the cover plate flipped up