TA Triumph-Adler FAX 950 - Manual (Page 46)

3-8
6HFWLRQ
Making Copies
10
10. Once all of the originals have been ejected onto the
document eject tray, “CHANGE DOC. SETTING” will
appear in the message display. Turn the originals over and
set them on the document table once again.
Once the originals are set on the document table, they will be
automatically scanned into memory, combined with the
previously scanned data and the copy operation will begin.
* If “DOCUMENT MISMATCH” appears in the message
display, the number of originals scanned for the front side and
the number scanned for the reverse side is different. In this
case, press the STOP key and perform the operation once
again from the beginning.
* Once copying is completed, remove the finished copies from
the paper eject table. A maximum of 100 copies can be
stacked at one time on the paper eject table.