TA Triumph-Adler FAX 950 - Manual (Page 137)

10-19
6HFWLRQ
Options
(8) Removing the Printer Driver
Even if you no longer plan to use this printer with your computer, it is
usually not necessary to remove the files related to this printing
system. If, however, for any reason it becomes necessary to remove
these files from your computer, carry out the following procedure.
1. Start up Windows 3.1. Quit all other applications that may be open
and start up Program Manager.
2. Insert the Windows 3.1 Printer Driver Installer Disk into Drive A.
3. Use the mouse to point to File in the Menu Bar and click on Run…
in the drop-down menu which is displayed.
4. Type “a:\uninst” in the Command Line dialogue box and then click
on OK.
5. A window will appear to confirm that you really want to continue
the uninstallation procedure. To continue, click on Yes. The files
comprising this Printing System will be removed.
6. To finalise the uninstallation procedure, restart Windows 3.1 by
clicking on Restart Windows. Once Windows 3.1 is running again,
all of the files and menus relevant to this Printing System will have
disappeared.
(9) Cautions when Printing
• The result of printing is not as expected
When printing from within an application, there may be times when
the results of printing on this printer will differ slightly from that on
another printer. This is due to the difference in the resolution as
handled by the application and the actual resolution used by the
printer.
• Colour areas are not printed out
As this printer handles light grey, light green, light yellow, light
magenta and light cyan as whites, there is a possibility, depending
upon the display driver in use, that areas with these colours may not
be printed out correctly.
• Small coloured text is printed as black
Normally, coloured text is printed out by this printer as a level of grey.
However, small-sized coloured text may be printed as black in order
to maximise legibility.
• Number of copies
When the number of copies to be printed is set in both the application
and the Setup dialogue box, depending on how the application
handles multiple copies, the correct number of copies may not be
printed. It is recommended, therefore, that only those settings in the
Setup dialogue box be used.
5 Cancelling printing
1. In the Print Manager window, highlight the print job you want to
cancel by clicking on the corresponding file name.
2. Click on Pause and then Delete. The selected file name will be
deleted from the printing queue.
6 Pausing and resuming printing
1. In the Print Manager window, highlight the print job you want to
pause by clicking on the corresponding file name.
2. Click on Pause. Printing will stop.
3. Click on Resume to resume printing.
The Menu Bar in the Print Manager window
The following menus can be found in the Menu Bar of the Print
Manager window. Use the mouse to point to each menu and display
the corresponding drop-down menu.
● Printer menu
The following printing methods are available under this menu.
• Low Priority
Selecting this setting gives priority to other application software,
resulting in slower processing of print data.
• Mid Priority
Selecting this setting selects the standard processing speed.
• High Priority
Selecting this setting gives priority to processing of the print data,
resulting in a decrease in speed of other application software during
printing.
● Option menu
• Connect port...
Selecting this command opens the Connect port dialogue box to
allow verification or changing of the connected port.
• Self test...
Selecting this command opens the Self Test dialogue box. A test
print can be made simplify by clicking on OK.
● Help menu
• Contents
Selecting this command displays the contents page of the Print
Manager help file.
• Search for Help On…
Selecting this command opens the Key word search dialogue box.
• Help to use Help
Selecting this command displays information on how to use the Help
function.
• About…
Selecting this command displays information, including the version
number, specific to the version of Print Manager bundled with this
Printing System.