Broadcast transmission, Broadcast transmission -3, 6hfwlrq fax operation (various functions) – TA Triumph-Adler FAX 950 User Manual
Page 49
5. Use the keypad to enter the desired time for the communication to
begin.
* The time should be set on a 24-hour time basis (00:00 - 23:59).
[Note]
* When you are designating a start time for one of the other various
functions of this fax such as Polling communication, etc., you will be
asked to carry out steps 5 and 6 on this page.
4-3
6HFWLRQ
Fax Operation (Various Functions)
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter your
access code (or the registered management password) and then
press the ENTER FUNCTION key. Refer to “(5) Entering Your
Access Code”, page 7-28.
1. If the operation involves the transmission of documents, set the
documents to be transmitted and, if necessary, select the desired
resolution and contrast.
2. Press the DELAYED TX. key.
3. Enter the fax number of the other party. Repeat steps
1
and
2
below until all desired numbers have been entered.
* The fax numbers can be entered with the keypad, abbreviated
numbers, one-touch keys or group dial keys.
* If “EXCEEDS MAX. DEST” appears in the message display, the
number of fax numbers entered exceeds the acceptable limit.
1
Enter a fax number.
2
Check the display and press the ENTER FUNCTION key.
4. Press the ENTER FUNCTION key.
6(7 '2&80(17
'(/$<75$160,7
(17(5 '(67 )$;1R
7,0(
7,0(
26
27
28
29
30
21
22
23
24
25
31
32
33
34
35
36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ABC
DEF
GHI
JKL
MNO
PQR
ST
UVW
XYZ
? [ ] % ! =
6. Press the ENTER FUNCTION key.
7. Press the START key.
The documents will be scanned and stored in memory awaiting the
appointed start time.
This function allows the same documents to be transmitted
successively to a number of destinations one after another, in a
single operation. If, for example, transmitting the same documents
from a central office to multiple branch offices, this function is quite
convenient as it requires operations to be carried out only once.
The documents to be transmitted need only to be stored in
memory, and dialling and transmitting operations are repeated
automatically for each destination.
* If all of the fax numbers are entered using abbreviated numbers,
one-touch keys or group dial keys, this fax is capable of
automatically transmitting the same documents to up to 145
different fax machines in a single operation. If the keypad is
used, up to 10 different destinations is possible.
* Once the broadcast operation to all of the destinations is
complete, a Broadcast transmission report (Multi-transmission
report) will be printed out. (Refer to “Transmission Report”,
page 8-2.)
* One-touch dial confirmation will not engage for Broadcast
transmissions.
Broadcast Transmission
Transmitting fax
Receiving fax
* To cancel the procedure part way through, press the STOP key.
The message display will revert to the initial mode.
* If Restricted access is turned ON, it is first necessary to enter your
access code (or the registered management password) and then
press the ENTER FUNCTION key. Refer to “(5) Entering Your
Access Code”, page 7-28.
6(7 '2&80(17