ProSoft Technology ILX34-AENWG - Manual (Page 115)

ILX34-AENWG ♦ Point I/O Platform Diagnostics and Troubleshooting
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 115 of 177
August 16, 2013
Programming is done in four stages, with pauses between the stages. During
programming, you will see progress indicators like this:
Upon successful completion you should see the following:
8 Click OK, then C ANCEL , then Y ES to exit ControlFLASH.
4.11.6 Testing the new firmware installation
Turn off the power to your ILX34, wait a few seconds, then turn power on. Once
the Point Bus Status LED is no longer solid RED, the unit should be operational
with the new firmware.