ProSoft Technology ILX34-AENWG - Manual (Page 89)

ILX34-AENWG ♦ Point I/O Platform Diagnostics and Troubleshooting
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 89 of 177
August 16, 2013
Important: The values on this page are in non-volatile memory. Changes to these parameters do
not take effect until you reset or cycle power to the ILX34-AENWG adapter.
Field Description
Service The network service type. Only "HTTP" is available for
configuration on the ILX34-AENWG
Description The network service description. Only "Web Server" is available
for configuration on the ILX34-AENWG
Status Running or Disabled
Enable Select (check) to enable the web server.
Deselect (uncheck) to disable the web server.
Changes will take effect the next time the module is reset.
To re-enable the web server, reset the factory network
parameters as described in Restoring Factory Default Network
Settings (page 100).
Set Password
Field Description
New Password To change the password, type the new password into this field,
and then type it again in the "Confirm Password" field.

The password is CaSe SeNsItIvE.
 The default password is the word "password".
Confirm Password
Wireless Settings Page
The W IRELESS S ETTINGS page opens when you select the C ONFIGURATION folder
in the menu on the left side of the page, and then click the W IRELESS S ETTINGS
link. Use this page to configure the radio settings for the adapter.