ProSoft Technology ILX34-AENWG - Manual (Page 86)

Diagnostics and Troubleshooting ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 86 of 177 ProSoft Technology, Inc.
August 16, 2013
Image Signal Strength Signal to Noise
-60 dBm or greater 30 dB
4.1.2 Configuration Pages
The C ONFIGURATION pages allows you to view and edit configuration information
for your ILX34-AENWG I/O adapter and connected devices. Select the
C
ONFIGURATION folder in the tree view on the left side of the page, and click
E XPAND to view the menu, or click the tabs at the top of the page.
Important: The values on these pages are in non-volatile memory. Changes to these parameters
do not take effect until you reset or cycle power to the ILX34-AENWG adapter.
Some of the configuration pages require you to provide a user name and
password.
 The default user name is "admin".
 The default password is "password".
 The user name and password are case sensitive.
Identity Page
The I DENTITY page opens when you select the C ONFIGURATION folder in the menu
on the left side of the page, and then click the I DENTITY link. Use this page to
view or modify the ILX34-AENWG adapter's name, location and chassis size.
Important: The values on this page are in non-volatile memory. Changes to these parameters do
not take effect until you reset or cycle power to the ILX34-AENWG adapter.