ProSoft Technology ILX34-AENWG - Manual (Page 157)

ILX34-AENWG ♦ Point I/O Platform Reference
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 157 of 177
August 16, 2013
Service Code No. (hex) Service Name
4C Get and Clear Counters
Get and Clear Counters applies to Attributes 7-10 only,
if directed at attribute '100' for get and clear all
attributes 7-10 values.
05 Reset
6.3.3 Attributes Supported: Wireless Diagnostics Vendor Specific
Inst ID Attribute Description Get Set Size Default Value / Description
0 1 Object Software
Revision
X - Word 1
2 Max Instance X - Word 1
1 1 Radio Firmware
Number X - Long Radio Module firmware revision. (Example: 6006 -
> 6.60)
2 Radio Link Time X X Struct
( Word -
Days,
Word -
Hours,
Word -
Min's,
Word -
Sec's)
Radio Operational time. Resettable.
3 Radio Parent
MAC address X - Array (6)
of Byte Connected Parent MAC address.
4 Parent Data Rate X - Word Data rate of connection to parent.
Data Rate TX Enumerated Rate Setting:
1, 2 ,5.5, 6, 11, 12, 18, 24, 36, 48, 54 (Mbps)
5 Average Signal
Level X - Word Signal strength in dBm of link to parent.
6 Average Noise
Level X - Word Noise Level in dBm.
7 Packets Tx
Success X X Struct
(Long,
Long
Total Packet count and Avg/sec of successfully
tramsitted packets. Resettable.
8 Packets Tx
Failures
X X Struct
(Long,
Long Total Packet count and Avg/sec of failed
tramsitted packets. Resettable
9 Packets Tx
Retries X X Struct
(Long,
Long
Total Packet count and Avg/sec of retries of
tramsitted packets. Resettable
10 Packets Rx
Success X X Struct
(Long,
Long
Total Packet count and Avg/sec of successfully
received packets. Resettable
11 Radio Actual IP
Address X Long Radio IP Address Used
12 Extended Radio
FW Version X String Extended Radio Firmware version in string
format.