ProSoft Technology ILX34-AENWG - Manual (Page 21)

ILX34-AENWG ♦ Point I/O Platform Start Here
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 21 of 177
August 16, 2013
1.8.1 Adapter Components
The Wireless POINT I/O Adapter is a communications adapter for POINT I/O
modules. The adapter provides an interface for controlling and communicating
with POINT I/O modules from an Ethernet network.
1.8.2 Install the Wireless Point I/O Adapter on the DIN-rail
Warning: You must follow all safety instructions when installing this or any other electronic
devices. Failure to follow safety procedures could result in damage to hardware or data, or even
serious injury or death to personnel. Refer to the documentation for each device you plan to
connect to verify that suitable safety procedures are in place before installing or servicing the
device.
1 Position the adapter vertically above the DIN-rail.