ProSoft Technology ILX34-AENWG - Manual (Page 138)

Ladder Logic ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 138 of 177 ProSoft Technology, Inc.
August 16, 2013
Configuration Data Data Type Default Value Valid Data Values
On Value 1
Off Value 1
On Value 2
Off Value 2
On Value 3
Off Value 3
On Value 4
Off Value 4 DINT
DINT
DINT
DINT
DINT
DINT
DINT
DINT 0
0
0
0
0
0
0
0 Counter Config 3, 5, 6, 7:
0…16,777,215
Counter Config 0, 1, 2, 4:
0 to Rollover Value
SS PWM Value
(<0 or >9500 =Hold Last State) INT 0 0…9500
(0.00…95.00%)
SS Counter Control SINT 0
SS Counter Reset BIT 0 0=Count Unchanged
1=Count Cleared
SS Counter Preset BIT 1 0=Count Unchanged
1=Count Set to Preset
SS Value Reset
(Stored / Accum. Count)
BIT 2 0=Count Unchanged
1=Count Cleared
1734-VHSC24, 1734-VHSC5
1734 POINT I/O Catalog Number RSLogix5000 Module Description
1734-VHSC24 1 Channel 15…24V dc Very High-speed Counter
1734-VHSC5 1 Channel 5V dc Very High-speed Counter
Configuration Data Data Type Default Value Valid Data Values
SS Output Control SINT 0
SS Out 0 Force BIT 0 0=Output Off
1=Output Forced On
SS Out 0 En BIT 1 0=Output Disabled
1=Output Enabled
SS Out 0 Electronic Fuse BIT 2 0=Auto Retry
1=Latch Off
SS Out 0 Diagnostic Speed BIT 3 0 ≤ 8 ms Response
1=50 ms Response
SS Out 1 Force BIT 4 0=Output Off
1=Output Forced On
SS Out 1 En BIT 5 0=Output Disabled
1=Output Enabled
SS Out 1 Electronic Fuse BIT 6 0=Auto Retry
1=Latch Off
SS Out 1 Diagnostic Speed BIT 7 0 ≤ 8 ms Response
1=50 ms Response
To enter values from +128 to +255, use these conversion formulas:
 Desired Decimal Position Value - 256 = Entered Decimal Position Value.
Example: for a divisor of 200, 200 - 256 = -56