ProSoft Technology ILX34-AENWG User Manual
Page 37
Advertising
ILX34-AENWG ♦ Point I/O Platform
Configure the ILX34-AENWG
Wireless POINT I/O Adapter
User Manual
ProSoft Technology, Inc.
Page 37 of 177
August 16, 2013
2 Expand the C
OMMUNICATIONS
node, and then select the E
THERNET
B
RIDGE
module that matches your hardware. This example uses a 1756-ENBT/A
module.
Note: If you are prompted to "Select Major Revision", choose the lower of the available revision
numbers.
3 Name the ENBT/A module, then set the IP Address and slot location in the
local rack with the ControlLogix processor.
4 Click OK.
Advertising