Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 154)

clear port protected name
4-50 Port Configuration
Example
This example shows how to show the name of protected port group 1:
D2(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Use this command to clear the name of a protected group.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the name of protected port group 1:
D2(rw)->clear port protected name 1
group‐id Specifies the id of the group for which to clear the name. Id can range
from 0 to 2.