Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 174)

show snmp context
5-20 SNMP Configuration
Example
This example shows how to display SNMP MIB view configuration information:
D2(su)->show snmp view
--- SNMP MIB View information ---
View Name = All
Subtree OID = 1
Subtree mask =
View Type = included
Storage type = nonVolatile
Row status = active
View Name = All
Subtree OID = 0.0
Subtree mask =
View Type = included
Storage type = nonVolatile
Row status = active
View Name = Network
Subtree OID = 1.3.6.1.2.1
Subtree mask =
View Type = included
Storage type = nonVolatile
Row status = active
Table 5‐23 provides an explanation of the command output. For details on using the set snmp
view command to assign variables, refer to “ set snmp view ” on page 5‐21.
show snmp context
Use this command to display the context list configuration for SNMP’s view‐based access control.
Syntax
show snmp context
Parameters
None.
Defaults
None.
Table 5-23 show snmp view Output Details
Output Field What It Displays...
View Name Name assigned to a MIB view.
Subtree OID Name identifying a MIB subtree.
Subtree mask Bitmask applied to a MIB subtree.
View Type Whether or not subtree use must be included or excluded for this view.
Storage type Whether storage is in nonVolatile or Volatile memory
Row status Status of this entry: active, notInService, or notReady.