Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 374)

RMON Monitoring Group Functions
13-2 RMON Configuration
History Records periodic statistical
samples from a network. Sample period, number of
samples and item(s) sampled. “ show rmon history ” on
page 13-5
“
set rmon history ” on
page 13-6
“
clear rmon history ” on
page 13-7
Alarm Periodically gathers
statistical samples from
variables in the probe and
compares them with
previously configured
thresholds. If the monitored
variable crosses a
threshold, an event is
generated. Alarm type, interval, starting
threshold, stop threshold. “ show rmon alarm ” on
page 13-8
“
set rmon alarm properties ”
on page 13-9
“
set rmon alarm status ” on
page 13-10
“
clear rmon alarm ” on
page 13-11
Event Controls the generation and
notification of events from
the device. Event type, description, last
time event was sent. “ show rmon event ” on
page 13-12
“
set rmon event properties ”
on page 13-13
“
set rmon event status ” on
page 13-14
“
clear rmon event ” on
page 13-14
Filter Allows packets to be
matched by a filter
equation. These matched
packets form a data stream
or “channel” that may be
captured. Packets matching the filter
configuration. “ show rmon channel ” on
page 13-16
“
set rmon channel ” on
page 13-16
“
clear rmon channel ” on
page 13-17
“
show rmon filter ” on
page 13-17
“
set rmon filter ” on
page 13-18
“
clear rmon filter ” on
page 13-19
Packet
Capture Allows packets to be
captured upon a filter
match. Packets matching the filter
configuration. “ show rmon capture ” on
page 13-20
“
set rmon capture ” on
page 13-21
“
clear rmon capture ” on
page 13-22
Table 13-43 RMON Monitoring Group Functions and Commands (Continued)
RMON
Group
What It Does... What It Monitors... CLI Command(s)