Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 327)

clear port txq
D-Series CLI Reference 10-9
Parameters
Defaults
By default, transmit queues are defined as follows:
Mode
Switch command, read‐write.
Example
This example shows how to clear transmit queue values on ge .1.1:
D2(su)->clear port txq ge.1.1
port‐string Clears transmit queue values on specific port(s) back to their default
values. For a detailed description of possible port‐string values, refer to
“
Port String Syntax Used in the CLI ” on page 4‐1.
Only physical ports can be configured with this command. LAG ports
cannot be configured.
Queue Mode Weight Queue Mode Weight
0 WRR 1 4 WRR 5
1 WRR 2 5 WRR 6
2 WRR 3 6 WRR 7
3 WRR 4 7 WRR 8