Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 492)

set pwa enhancedmode
15-68 Security Configuration
set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable PWA enhancedmode:
D2(su)->set pwa enhancedmode enable
Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.
Commands
show ssh status
Use this command to display the current status of SSH on the switch.
Syntax
show ssh status
enable | disable Enables or disables PWA enhancedmode.
For information about... Refer to page...
show ssh status 15-68
set ssh 15-69
set ssh hostkey 15-69