Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 398)

set dhcp bootp
14-4 DHCP Server Configuration
Example
This example enables DHCP server functionality.
D2(rw)->set dhcp enable
set dhcp bootp
Use this command to enable or disable automatic address allocation for BOOTP clients. By
default, address allocation for BOOTP clients is disabled. Refer to RFC 1534, “Interoperation
Between DHCP and BOOTP,” for more information.
Syntax
set dhcp bootp {enable | disable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example enables address allocation for BOOTP clients.
D2(rw)->set dhcp bootp enable
set dhcp conflict logging
Use this command to enable conflict logging. By default, conflict logging is enabled. Use the clear
dhcp conflict logging command to disable conflict logging.
Syntax
set dhcp conflict logging
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example enables DHCP conflict logging.
D2(rw)->set dhcp conflict logging
enable | disable Enables or disables address allocation for BOOTP clients.