Show summertime, Set summertime, Show summertime -17 set summertime -17 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 55
show summertime
D-Series CLI Reference 2-17
show summertime
Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display daylight savings time settings:
D2(su)->show summertime
Summertime is disabled and set to ''
Start : SUN APR 04 02:00:00 2004
End : SUN OCT 31 02:00:00 2004
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the first Sunday of April and ending at 2:00
of the last Sunday of October
set summertime
Use this command to enable or disable the daylight savings time function.
Syntax
set summertime {enable | disable} [zone]
Parameters
Defaults
If a zone name is not specified, none will be applied.
Mode
Switch command, read‐only.
Example
This example shows how to enable daylight savings time function:
D2(su)->set summertime enable
enable | disable
Enables or disables the daylight savings time function.
zone
(Optional) Applies a name to the daylight savings time settings.