Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 248)

Creating and Naming Static VLANs
7-4 802.1Q VLAN Configuration
Creating and Naming Static VLANs
Purpose
To create a new static VLAN, or to enable or disable existing VLAN(s).
Commands
set vlan
Use this command to create a new static IEEE 802.1Q VLAN, or to enable or disable an existing
VLAN.
Syntax
set vlan {create | enable | disable} vlan-list
Parameters
Defaults
None.
Table 7-30 show vlan Output Details
Output Field What It Displays...
VLAN VLAN ID.
NAME Name assigned to the VLAN.
Status Whether it is enabled or disabled.
VLAN Type Whether it is permanent (static) or dynamic.
Egress Ports Ports configured to transmit frames for this VLAN.
Forbidden Egress
Ports Ports prevented from transmitted frames for this VLAN.
Untagged Ports Ports configured to transmit untagged frames for this VLAN.
For information about... Refer to page...
set vlan 7-4
set vlan name 7-5
clear vlan 7-5
clear vlan name 7-6
create | enable |
disable Creates, enables or disables VLAN(s).
vlan‐list Specifies one or more VLAN IDs to be created, enabled or disabled.