Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 422)

show dhcp pool configuration
14-28 DHCP Server Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes option 19 from address pool “auto1.”
D2(rw)->clear dhcp pool auto1 option 19
show dhcp pool configuration
Use this command to display configuration information for one or all address pools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
Defaults
None.
Mode
Read‐only.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
code Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.