Show policy rule, Show policy rule -6 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 292
show policy rule
9-6 Policy Classification Configuration
show policy rule
Use this command to display policy classification rule information.
Syntax
show policy rule [all | admin-profile | profile-index] [ether | ipproto |
ipdestsocket | ipsourcesocket | iptos | macdest | macsource | tcpdestport |
tcpsourceport | udpdestport | udpsourceport] [data] [mask mask] [port-string port-
string] [rule-status {active | not-in-service | not-ready}] [storage-type {non-
volatile | volatile}] [vlan vlan] | [drop | forward] [dynamic-pid dynamic-pid]
[cos cos] [admin-pid admin-pid] [-verbose] [usage-list] [display-if-used]
Parameters
all | admin‐
profile | profile‐
index
Displays policy classification rules for all profiles, profile ID 0 (admin‐
profile), or for a specific profile index number. Valid values are 1 ‐ 1023.
ether
Displays Ethernet type II rules.
ipproto
Displays IP protocol field in IP packet rules.
ipdestsocket
Displays IP destination address rules.
ipsourcesocket
Displays IP source address rules.
iptos
Displays Type of Service rules.
macdest
Displays MAC destination address rules.
macsource
Displays MAC source address rules.
tcpdestport
Displays TCP destination port rules.
tcpsourceport
Displays TCP source port rules.
udpdestport
Displays UDP destination port rules.
udpsourceport
Displays UDP source port rules.
data
Displays rules for a predefined classifier. This value is dependent on the
classification type entered. Refer to
for valid values for each
classification type.
mask mask
(Optional) Displays rules for a specific data mask. Refer to
for
valid values for each classification type and data value.
port‐string port‐
string
(Optional) Displays rules related to a specific ingress port.
rule‐status active
| not‐in‐service |
not‐ready
(Optional) Displays rules related to a specific rules status.
storage‐type non‐
volatile | volatile
(Optional) Displays rules configured for either non‐volatile or volatile
storage.
vlan vlan
(Optional) Displays rules for a specific VLAN ID.
drop | forward
Displays rules based on whether matching packets will be dropped or
forwarded.
dynamic‐pid
dynamic‐pid
Displays rules associated with a specific dynamic policy ID.
cos cos
(Optional) Displays rules for a Class‐of‐Service value.