Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 469)

show vlanauthorization
D-Series CLI Reference 15-45
Mode
Switch command, read‐write.
Example
This example show how to clear VLAN authorization for all ports on slots 3, 4, and 5:
D2(rw)->clear vlanauthorization ge.3-5.*
show vlanauthorization
Displays the VLAN authentication status and configuration information for the specified ports.
Syntax
show vlanauthorization [port-string]
Parameters
Defaults
If no port string is entered, the status for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This command shows how to display VLAN authorization status for ge.1.1:
G3(su)‐>show vlanauthorization ge.1.1
Vlan Authorization: ‐ enabled
port status administrative operational authenticated vlan id
egress egress mac address
------- -------- -------------- ----------- ----------------- -------
ge.1.1 enabled untagged
Table 15‐50 provides an explanation of command output. For details on enabling and assigning
protocol and egress attributes, refer to “ set vlanauthorization ” on page 15‐43 and “ set
vlanauthorization egress ” on page 15‐44.
port‐string (Optional) Displays VLAN authentication status for the specified ports. If
no port string is entered, then the global status of the setting is displayed.
For a detailed description of possible port‐string values, refer to “
Port
String Syntax Used in the CLI ” on page 4‐1.
Table 15-50 show vlanauthorization Output Details
Output Field What It Displays...
port Port identification
status Port status as assigned by set vlanauthorization command
administrative
egress Port status as assigned by the set vlanauthorization egress command
operational egress Port operational status of vlanauthorization egress.