Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 236)

clear spantree lpcapablepartner
6-44 Spanning Tree Configuration
clear spantree lpcapablepartner
Use this command to reset the Loop Protect capability of port link partners to the default state of
false.
Syntax
clear spantree lpcapablepartner port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the Loop Protect partner capability for ge .1.1:
D2(rw)->clear spantree lpcapablepartner ge.1.1
set spantree lpthreshold
Use this command to set the Loop Protect event threshold.
Syntax
set spantree lpthreshold value
Parameters
Defaults
None. The default event threshold is 3.
Mode
Switch command, read‐write.
Usage
The LoopProtect event threshold is a global integer variable that provides protection in the case of
intermittent failures. The default value is 3. If the event counter reaches the threshold within a
given period (the event window), then the port, for the given SID, becomes locked (that is, held
indefinitely in the blocking state). If the threshold is 0, the ports are never locked.
port‐string Specifies port(s) for which to clear their link partners’ Loop Protect
capability (reset to false).
value Specifies the number of events that must occur during the event
window in order to lock a port/SID. The default value is 3 events. A
threshold of 0 specifies that ports will never be locked.