Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 247)

show vlan
D-Series CLI Reference 7-3
Command
show vlan
Use this command to display all information related to one or more VLANs.
Syntax
show vlan [static] [vlan-list] [portinfo [vlan vlan-list | vlan-name] [port port-
string]]
Parameters
Defaults
If no options are specified, all information related to static and dynamic VLANs will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
“DEFAULT VLAN”. Ports allowed to transmit frames belonging to VLAN 1 are listed as egress
ports. Ports that won’t include a VLAN tag in their transmitted frames are listed as untagged
ports. There are no forbidden ports (prevented from transmitted frames) on VLAN 1:
D2(su)->show vlan 1
VLAN: 1 NAME: DEFAULT VLAN
VLAN Type: Default
Egress Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Forbidden Egress Ports
None.
Untagged Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Table 7‐30 provides an explanation of the command output.
For information about... Refer to page...
show vlan 7-3
static (Optional) Displays information related to static VLANs. Static VLANs are
manually created using the set vlan command (“
set vlan ” on page 7‐4),
SNMP MIBs, or the WebView management application. The default VLAN,
VLAN 1, is always statically configured and can’t be deleted. Only ports
that use a specified VLAN as their default VLAN (PVID) will be displayed.
vlan‐list (Optional) Displays information for a specific VLAN or range of VLANs.
portinfo (Optional) Displays VLAN attributes related to one or more ports.
vlan vlan‐list |
vlan‐name (Optional) Displays port information for one or more VLANs.
port port‐string (Optional) Displays port information for one or more ports.