Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 167)

show snmp community
D-Series CLI Reference 5-13
Parameters
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switch command, read‐write.
Example
This example shows how to clear all settings assigned to the “public” user within the SNMP group
“anyone”:
D2(su)->clear snmp group anyone public
show snmp community
Use this command to display SNMP community names and status. In SNMPv1 and v2,
community names act as passwords to remote management.
Syntax
show snmp community [name]
Parameters
Defaults
If name is not specified, information will be displayed for all SNMP communities.
Mode
Switch command, read‐only.
Example
This example shows how to display information about the SNMP “public” community name. For
a description of this output, refer to set snmp community (page 5‐14).
D2(su)->show snmp community public
--- Configured community strings ---
Name = *********
Security name = public
Context =
Transport tag =
Storage type = nonVolatile
Status = active
groupname Specifies the SNMP group to be cleared.
user Specifies the SNMP user to be cleared.
security‐model v1 |
v2c | usm (Optional) Clears the settings associated with a specific security model.
name (Optional) Displays SNMP information for a specific community name.