Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 307)

clear cos settings
D-Series CLI Reference 9-21
Example
This example shows how to create CoS entry 8 with a priority value of 3:
D2(rw)->set cos settings 8 priority 3
clear cos settings
Use this command to clear Class of Service entry settings.
Syntax
clear cos settings cos-list {[all] | [priority] [tos-value] [irl-reference]}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the priority for CoS entry 8:
D2(rw)->clear cos settings 8 priority
show cos settings
Use this command to display Class of Service parameters.
Syntax
show cos settings [cos-list]
Parameters
Defaults
If not specified, all CoS entries will be displayed.
Mode
Switch command, read‐only.
cos‐list Specifies a Class of Service entry to clear.
all Clears all settings associated with this entry.
priority Clears the priority value associated with this entry.
tos‐value Clears the Type of Service value associated with this entry.
irl‐reference Clear the IRL reference associated with this entry.
cos‐list (Optional) Specifies a Class of Service entry to display.