Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 67)

show license
D-Series CLI Reference 2-29
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to activate a permanent license key on the switch with serial number
075103099041 . In this example, the switch is a stand‐alone unit so its unit number is 1.
D2(rw)->set license INCREMENT D2Policy 2008.0212 permanent DF6A8558E5AB
075103099041
Validating license on unit 1
License successfully validated and set on unit 1
D2(rw)->
show license
Use this command to display license key information for switches with activated licenses.
Syntax
show license
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
type Specifies the type of license. For the D‐Series, the value in this field is
always INCREMENT.
feature The name of the feature being licensed.
DBV A date‐related string generated as part of the license.
expiration Indicates whether the license is a permanent or an evaluation license. If
the license is an evaluation license, this field will contain the expiration
date of the license. If the license is a permanent license, this field will
contain the word “permanent.”
key The license key.
hostid The serial number of the switch to which this license applies.