Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 170)

show snmp access
5-16 SNMP Configuration
Defaults
If groupname is not specified, access information for all SNMP groups will be displayed.
If security‐model is not specified, access information for all SNMP versions will be displayed.
If noauthentication, authentication or privacy are not specified, access information for all
security levels will be displayed.
If context is not specified, all contexts will be displayed.
If volatile, nonvolatile or read‐only are not specified, all entries of all storage types will be
displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP access information:
D2(su)->show snmp access
Group = SystemAdmin
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Group = NightOperator
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Table 5‐22 provides an explanation of the command output.
volatile |
nonvolatile | read‐
only (Optional) Displays access entries for a specific storage type.
Table 5-22 show snmp access Output Details
Output Field What It Displays...
Group SNMP group name.
Security model Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)