Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 446)

set macauthentication
15-22 Security Configuration
Example
This example shows how to display MAC session information:
D2(su)->show macauthentication session
Port MAC Address Duration Reauth Period Reauthentications
----- -----------------
---------- ------------- -----------------
ge.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled
Table 15‐49 provides an explanation of the command output.
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to globally enable MAC authentication:
D2(su)->set macauthentication enable
Table 15-49 show macauthentication session Output Details
Output Field What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“
Port String Syntax Used in the CLI ” on page 4-1.
MAC Address MAC address associated with the session.
Duration Time this session has been active.
Reauth Period Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in “
set macauthentication reauthperiod ” on
page 15-28.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in “
set
macauthentication reauthentication ” on page 15-26.
enable | disable Globally enables or disables MAC authentication.