Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 350)

show history
12-12 Logging and Network Management
Mode
Switch command, read‐only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
D2(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
show history
Use this command to display the size (in lines) of the history buffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the size of the history buffer:
D2(su)->show history
History buffer size: 20
set history
Use this command to set the size of the history buffer.
Syntax
set history size [default]
Parameters
Defaults
None.
size Specifies the size of the history buffer in lines. Valid values are 1 to 100.
default (Optional) Makes this setting persistent for all future sessions.