Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 303)

Configuring Policy Class of Service (CoS)
D-Series CLI Reference 9-17
D2(su)->show cos port-resource irl 1.0 1
Group Index Resource Type Unit Rate Rate Limit Type Action
----------- -------- ---- ---- ---------- --------------- ------
1.0 1 irl kbps 512 drop none
D2(su)->show cos port-resource irl 2.0 1
Group Index Resource Type Unit Rate Rate Limit Type Action
----------- -------- ---- ---- ---------- --------------- ------
2.0 1 irl kbps 10000 drop none
3. In the CoS IRL reference mapping table for each port group, create a reference for each IRL
resource created in the previous step. We will use reference number 1.
D2(su)->set cos reference irl 1.0 1 rate-limit 1
D2(su)->set cos reference irl 2.0 1 rate-limit 1
D2(su)->show cos reference irl 1.0
Group Index Reference Type Rate Limiter
----------- --------- ---- ------------
1.0 0 irl none
1.0 1 irl 1
1.0 2 irl none
1.0 3 irl none
...
1.0 97 irl none
1.0 98 irl none
1.0 99 irl none
D2(su)->show cos reference irl 2.0
Group Index Reference Type Rate Limiter
----------- --------- ---- ------------
2.0 0 irl none
2.0 1 irl 1
2.0 2 irl none
2.0 3 irl none
...
2.0 97 irl none
2.0 98 irl none
2.0 99 irl none
4. In the CoS settings table, configure a CoS setting for CoS index 1, which has a priority of 0. We
enter the IRL reference, created in the previous step.
D2(su)->set cos settings 0 irl-reference 1
D2(su)->show cos settings
CoS Index Priority ToS IRL
--------- ---------- ------- -----
0 0 * 1
1 1 * *
2 2 * *
3 3 * *
4 4 * *
5 5 * *
6 6 * *
7 7 * *