Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 284)

set diffserv service
8-16 Differentiated Services Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display a detailed incoming traffic statistics about service port ge.1.1:
D2(rw)->show diffserv service stats detailed ge.1.1 in
Interface...................................... ge.1.1
Direction...................................... In
Operational Status............................. Up
Policy Name.................................... admin
Class Name..................................... system
In Discarded Packets........................... 0
set diffserv service
Use this command to add or remove a Diffserv policy to incoming traffic on one or more ports.
Syntax
set diffserv service {add | remove} {in} port-string policyname
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to apply the Diffserv policy named “admin” to incoming traffic on ports
ge1.1‐10:
D2(rw)->set diffserv service add in ge.1.5 admin
summary Displays Diffserv a summary of service statistics.
detailed port‐string Displays detailed statistics for a specific port.
in Displays information about incoming traffic.
add | remove Adds or removes the specified policy.
in Adds or removes the specified policy to incoming traffic.
port‐string Specifies the port(s) to which this policy configuration will be applied.
policyname Specifies the policy name to be added to or removed from port traffic.